SynLube Synthetic Motor Oil

SynLube™  Lube-4-Life^®

Synthetic Motor Oil

PERMANENTLY REPLACES
Conventional Motor Oil - in ALL applications !

---

Product Uses

SynLube™   Lube-4-Life^® ...for Engines
Is Fully Synthetic Motor Oil, intended for use in all Automotive, Industrial, Marine, Aviation and Agricultural applications where the use of Petroleum or Synthetic Motor Oil is recommended by the OEM (Original Equipment Manufacturer).

SynLube™   Lube-4-Life^® ...for Engines
Synthetic  Motor Oil can be used in all climatic conditions during all seasons because of its multi-viscosity SAE 5W-50 rating and an UHVI ( Ultra High Viscosity Index) of VI=200.

SynLube™   Lube-4-Life^® ...for Engines
Synthetic Motor Oil is a truly universal lubricant because it can be used in all Gasoline, Diesel, LPG or CNG fueled engines that are normally aspirated, turbo-charged or super-charged.

SynLube™  Lube-4-Life^® ...for Engines
Is 100% Synthetic Motor Oil engineered to permanently replace conventional Petroleum Motor Oil in most severe operating conditions in high performance diesel and gasoline engines in highway, off-highway, farm fleets, inboard marine and piston engine aircraft applications.

SynLube™  Lube-4-Life^® ...for Engines
Synthetic Motor Oil can be used in all applications where the use of any of the following SAE Viscosity rating is recommended by OEM:
SAE 30, SAE 40, SAE 50, SAE 5W-20, SAE 5W-30, SAE 10W-30, SAE 10W-40, SAE 15W-40, SAE 10W-50, SAE 15W-50, SAE 20W-50 or SAE 5W-50

---

Key Benefits

• Eliminates frequent Motor Oil Changes
  • Saves TIME
• Reduces Friction
  • Lower Fuel Consumption
  • More Power
  • Cooler Running Engine
• Reduces Wear
  • Longer Engine Service Life
• Protects Environment
  • NO Used Oil is generated
  • Eliminates disposal of Hazardous Used Oil
  • Saves EARTH
• Inexpensive to use
  • Costs less than a penny per mile to use
  • Saves MONEY

---

Additional Benefits

• Provides "dry" lubrication during cold or hot engine starting
• Allows engine cranking at -50°F(-45°C)
• Compatible with low and ultra low emission engine technology
• Does not affect catalytic converter efficiency
• Excellent long term engine wear protection
• Outstanding soot thickening control
• Low Base Fluid volatility reduces oil consumption and emissions
• Extra protection for Turbocharger bearings
• Outstanding TBN quality reserve
• Stable UHVI (Ultra High Viscosity Index) of up to VI=200
• Extended drain or NO drain capability
• Freedom from Used Oil Disposal
• Reduces bore polishing and eliminates engine piston scuffing
• up to 8% fuel savings
• Sub-zero and extreme high temperature service
• Compatible with both conventional Petroleum and Synthetic Motor Oils
• No special engine flushing is required when converting from any other Motor Oil in any Engine that does not have excessive deposits or pre-existing "sludge" or "gel" problem.

---

Product Description

SynLube™ Lube-4-Life^® is synergetic blend of man-made liquid and solid chemically inert lubricants that are thermally stable from -65°F (-54°C) to over 500°F (260°C). The sub-micronic particles of Graphite, PTFE and MoS₂ are colloidally suspended in a mixture of synthetic liquid lubricants.

SynLube™ Lube-4-Life^® is a 100% fully synthetic , multi-grade, super premium, colloidal Sol lubricant.

SynLube™ Lube-4-Life^® does not oxidize nor decompose like conventional Petroleum or Synthetic Motor Oils. It can be therefore used, without oil changes, for up to:

• 15 Years
• 150,000 Miles
• 3,000 Hours of Engine operation in Gasoline Engines
• 2,000 Hours of Engine operation in Diesel Engines

SynLube™  Lube-4-Life^® ...for Engines
Synthetic Motor Oil is backed up, if installed in NEW vehicles, by our exclusive Limited Lubrication Performance Warranty for up to:

• 15 Years or 150,000 Miles (15 years or 240,000 Kilometers)

See: Warranty in Services section for details.

---

Product Performance

SynLube™  Lube-4-Life^® Synthetic Motor Oil exceeds all of the following performance requirements:

• API Service SJ Warranty Requirements for new 1997 Model Cars, Vans & Trucks
• API Service SL Warranty Requirements for new 2001 Model Cars, Vans & Trucks
• API Service SM Warranty Requirements for new 2005 Model Cars, Vans & Trucks
• API Service SN Warranty Requirements for new 2011 Model Cars, Vans & Trucks
• GM Service dexos-1 Warranty Requirements for new 2011 GM vehicles Model Cars, Vans & Trucks
• API Service CG-4, CF-2, CF-4, CF Warranty Requirements for Heavy Duty Diesel Engines
• API Service CH-4 Warranty Requirements for new 1998 Low Emission Heavy Duty Diesels
• API Service CI-4 Warranty Requirements for new 2002 Low Emission Heavy Duty Diesels with EGR.
• API Service CJ-4 Warranty Requirements for new 2007 Low Emission Heavy Duty Diesels using fuel with 15 PPM Sulfur.
• DHD-1 performance specification for Heavy Duty Diesel Service according to International specifications
• Cummins performance specification 20076 (also called CH-4 plus or CH-4+)
• Mack EO-M, EO-M PLUS, EO-L, EO-L PLUS & EO-K/2 Performance Specifications
• Quadruple Cummins NTC-400 performance
• Caterpillar 10 TBN requirements
• Detroit Diesel 7SE 270
• Exceeds the requirements of MIL-L-22851C (U.S. Military)
• ACEA ES-99 European Specifications for Heavy Duty Diesel Engine Oil
• ACEA B4-98 European Specifications for Light Duty High Speed Diesel Engine Oil
• ACEA A3-98 European Specification for Gasoline Engine Oil
• CCMC PD-2 for High Performance Automotive Diesel Engines
• CCMC G-5 & D-5
• ILSAC GF-1, GF-2, GF-3, GF-4 & GF-5

---

Product Application

INITIAL FILL

     

SynLube™  Lube-4-Life^® ...for Engines INITIAL FILL is Fully Synthetic Motor Oil designed to be installed ONLY after Conventional Petroleum Motor Oil has been completely drained out and the Oil Filter has been replaced with MicroGlass Motor Oil Filter.

INITIAL FILL formula is used only the first time the product is installed.

Use as much INITIAL FILL formula as is required to completely fill the crankcase.

Verify the proper Motor Oil Level by checking the Engine's Oil Dipstick for indication of FULL

Two Versions of INITIAL FILL Synthetic Motor Oil are available and are fuel specific:

1. SAE 5W-50 rating allows for All-Season & All-Climate universal use in all Spark Ignition engines regardless of fuel that is used.
   (Gasoline, E85, Gasohol, LPG, CNG, Propane or Hydrogen)
   
   • ISO 100 Viscosity rating for industrial applications
   
   
2. SAE 5W-50 rating allows for All-Season & All-Climate universal use in all Diesel fueled Compression Ignition engines
   (#2 Diesel, B2 to B80 Bio-Diesel)
   • ISO 68 Viscosity rating for industrial applications

---

ADD OIL

SynLube™  Lube-4-Life^® ...for Engines ADD OIL is Fully Synthetic Motor Oil designed to be installed ONLY after Engine has been operated for some time (several thousand miles) and additional lubricant is required due to NORMAL oil consumption.

ADD OIL is designed to be used ONLY as "make-up" or "Add Oil" it is NOT intended to be used for conventional lubricant applications!

Two Versions of ADD OIL Synthetic Motor Oil available and are fuel specific:

1. SAE 5W-50 rating allows for All-Season & All-Climate universal use in all engines regardless of fuel that is used.
   (Gasoline, E85, Gasohol, Diesel, LPG, CNG, Propane or Hydrogen)
   
2. SAE 5W-50 rating allows for All-Season & All-Climate universal use in all Diesel fueled Compression Ignition engines.
   (#2 Diesel, B2 to B80 Bio-Diesel)

---

SERVICE FILL

SynLube™  Lube-4-Life^® ...for Engines SERVICE FILL is 100% Synthetic Motor Oil designed to be installed ONLY after periodic replacement of MicroGlass Motor Oil Filter.

It is Fully Synthetic Motor Oil, which is to be used ONLY in Gasoline fueled engines with very low oil consumption.
(Typically less than quart of ADD oil in 20,000 miles)

---

UNIVERSAL

SynLube™  Lube-4-Life^® ...for Engines UNIVERSAL is Synthetic Motor Oil, which is designed to be used for both;
the INITIAL FILL and as an ADD OIL.

UNIVERSAL formula Fully Synthetic Motor Oil is less expensive and offers slightly improved fuel consumption over the "Original Formula" consisting of the two component combination of INITIAL FILL & ADD OIL, however the Engine wear protection is slightly reduced and the lubricant service life is limited to lesser of:

• 5 Years
• 50,000 Miles
• 1,000 Hours of Engine operation

---

FLUSH OIL

SynLube™  Lube-4-Life^® ...for Engines FLUSH OIL is 100% Synthetic Motor Oil, designed to be installed in Engines which have been operated for long time on conventional Motor Oil
(60,000 miles or more).

FLUSH OIL formula Synthetic Motor Oil has been designed to remove sludge, gum and varnish deposits caused by long-term operation on conventional Petroleum Motor Oil

FLUSH OIL should be used with NEW OIL FILTER and Filter Magnet for about 100 miles or at minimum for TWO complete warm-up cycles, where engine achieves NORMAL operating temperature.

FLUSH OIL should be used prior the permanent installation of SynLube™  Lube-4-Life^® ...for Engines INITIAL FILL.

---

Health and Safety

Based on available toxicological information, this Synthetic Motor Oil produces no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene, including laundering oil-soaked clothing and washing skin-contact areas with soap and water. Also eye protection with suitable protective eyewear is suggested during handling and installation. In case of eye contact flush with plenty of water.

---

Packaging

SynLube™  Lube-4-Life^® SYNTHETIC MOTOR OILS are available in:

• One Liter [1.05 US Quart] (33.8 Oz.) plastic bottle
• Four Liter [4.22 US Quart] (135.2 Oz.) (1.05 US Gallon) plastic jug

---

Availability

In stock! - Available for immediate shipment.

---

Pricing**